Product Name: Acrylic Emulsion Resin 8019
Chemical Family: Acrylic polymers in aqueous emulsion
Trade Name: Resin 8019
Synonyms: None
Recommended Use: Industrial coating, adhesive, construction binder
Manufacturer: [Insert Manufacturer Name with Address and Contact]
Emergency Contact: [Insert Emergency Phone Number]
CAS Number: Mixture (Contains acrylic polymer and water, typically unassigned blend)
GHS Classification: Not classified as hazardous by GHS criteria
Physical Hazards: None under normal conditions
Health Hazards: May cause mild skin and eye irritation
Environmental Hazards: Large spills may affect aquatic ecosystems
Signal Word: None
Hazard Statements: Mild irritation possible with eye or skin contact
Precautionary Statements: Avoid contact with eyes and skin, do not ingest
Acrylic Polymer: 45-55%
Water: 45-55%
Defoamer/Preservatives (trace): Less than 1%
Additives: Surfactants and stabilizers in small amounts
CAS Numbers (as blend): Not available; constituents listed for reference
Eye Contact: Rinse gently with water for several minutes; seek attention if irritation continues
Skin Contact: Wash with mild soap and water; remove contaminated clothing
Inhalation: Move to fresh air; seek medical advice if symptoms appear
Ingestion: Rinse mouth, do not induce vomiting; get medical help if large amount swallowed
Symptoms: Slight redness, discomfort, cough or nausea in rare cases
Suitable Extinguishing Media: Water spray, foam, dry chemical, CO2
Specific Hazards: Product is water-based and not flammable, dried residue may burn
Combustion Products: Carbon monoxide, carbon dioxide, acrylic fumes
Protective Equipment: Standard protective clothing, self-contained breathing apparatus for large fires
Special Methods: Cool containers exposed to heat with water spray
Personal Precautions: Avoid direct contact, ventilate area
Spill Cleanup: Absorb with sand or inert material, collect using shovel or absorbent pad
Environmental Precautions: Prevent product from reaching drains or waterways
Disposal: Place cleanup waste in proper labeled container for disposal
Large Spills: Alert authorities as required
Handling: Wear gloves, goggles during use, avoid breathing mist
Storage: Store in sealed containers away from freezing and direct sunlight
Incompatible Materials: Strong oxidizers, acids, alkalis
Storage Temperature: 5–35°C, avoid extreme temperatures
Ventilation: Use with proper ventilation
Exposure Limits: No established limits for major components
Engineering Controls: General room ventilation adequate for normal use
Respiratory Protection: Not required under normal conditions; use mask if mist formed
Eye Protection: Safety goggles recommended
Skin Protection: Gloves, long sleeves
Hygiene Measures: Wash hands after use, do not eat or drink during use
Appearance: Opaque white emulsion
Odor: Mild, characteristic
pH: 7.0–8.5
Boiling Point: ~100°C (water basis)
Melting/Freezing Point: 0°C (water basis)
Solubility: Miscible in water
Vapor Pressure: Similar to water
Specific Gravity: 1.03–1.07
Viscosity: 500–2000 mPa.s
Flash Point: Not applicable (water-based)
Stability: Stable under recommended storage and handling conditions
Hazardous Polymerization: Will not occur
Conditions to Avoid: Freezing, high heat, direct sunlight
Materials to Avoid: Strong acids, strong oxidizers
Hazardous Decomposition: Carbon monoxide, carbon dioxide, potentially acrylic monomer vapors when burned
Acute Toxicity: Not expected to be harmful
Skin Contact: May cause mild irritation in sensitive individuals
Eye Contact: May cause slight redness or discomfort
Inhalation: No significant hazard under normal use, prolonged exposure to mist can irritate
Chronic Effects: No known long-term health effects
Carcinogenicity: None of the ingredients listed as carcinogenic
Biodegradability: Polymer is not readily biodegradable, water phase can degrade
Aquatic Toxicity: Low, but avoid release to waterways to prevent impact
Bioaccumulation: Not expected
Mobility in Soil: Moderate, can travel with water movement
Other Effects: Spills may cause slipperiness, impact oxygen levels in large quantities
Waste Disposal: Dispose in accordance with local, regional, national, and international regulations
Container Disposal: Empty containers may contain residue; rinse before discarding or recycling
Unusable Product: Solidify if necessary, then dispose as non-hazardous industrial waste
Do Not: Pour into waterways, drains, or soil
Waste Codes: Not classified as hazardous waste under most regulations
UN Number: Not regulated
UN Proper Shipping Name: Not classified as dangerous
Transport Hazard Class: Not regulated
Packing Group: Not regulated
Environmental Hazards: Not considered dangerous for transport
Special Precautions: Avoid extreme temperatures, prevent package leaks in transit
OSHA Hazard Communication: Not hazardous as defined by OSHA
SARA Title III: Not listed under Sections 302/304/313
TSCA Status: Components are listed or exempt
REACH Status: Components compliant or exempt
Other Regulations: Conforms to national chemical regulations in shipped countries
Labeling: Non-hazardous according to GHS, precautionary statements recommended for irritation prevention
