Product Name: Flame Retardant MflamCS
Product Use: Flame resistance treatment for polycotton textiles
Manufacturer: [Insert manufacturer name and contact info here]
Emergency Phone: [Insert emergency contact number]
CAS Number: [List CAS numbers for each component]
Synonyms: Not known
Recommended Restrictions: Industrial and professional use only
Classification: Eye irritation, Skin irritation, Chronic aquatic toxicity
Label Elements: Signal word: Warning, Hazard symbols: Exclamation mark, Environment
Hazard Statements: Causes skin and eye irritation, may cause allergic skin reaction, toxic to aquatic life with long lasting effects
Precautionary Statements: Avoid release to environment, wear protective gloves and goggles, wash skin thoroughly after handling
Other Hazards: Possible release of irritating fumes under fire conditions
Primary Components: Phosphorus compounds 20–40%, Nitrogen compounds 5–10%, Proprietary non-ionic surfactants 1–5%, Water balance to 100%
Hazardous Components: Ammonium polyphosphate [CAS: 68333-79-9], Urea [CAS: 57-13-6], Polymeric resin [proprietary]
Impurities: None expected to present significant hazard
Other Additives: Minor stabilizers present
Inhalation: Move person to fresh air, seek medical attention if symptoms persist, remove source of exposure if safe
Skin Contact: Wash gently with soap and water, remove contaminated clothing, seek medical help if rash or irritation occurs
Eye Contact: Rinse immediately with plenty of water for several minutes, lift eyelids for best rinsing, call a physician if redness or pain continues
Ingestion: Rinse mouth, do not induce vomiting, give water if victim is conscious, seek medical advice quickly
Most Important Symptoms and Effects: Irritation, redness, possible swelling of skin or eyes
Suitable Extinguishing Media: Water fog, foam, dry chemical, carbon dioxide
Special Hazards: May produce toxic gases like nitrogen oxides, phosphorus oxides, or ammonia
Protective Equipment: Full protective gear and self-contained breathing apparatus for firefighters
Special Information: Cool affected containers with water spray to prevent bursting, prevent runoff from entering drains or waterways if possible
Personal Precautions: Use gloves, goggles, avoid breathing vapors or mist, ventilate area
Environmental Precautions: Contain spill, prevent entry to sewers or waterways, inform authorities if large spill reaches water
Cleanup Methods: Absorb with non-combustible material, sweep up and shovel into containers, rinse area with water, dispose according to local regulations
Special Procedures: Wash contaminated area, avoid direct contact with spilled material
Handling: Avoid skin and eye contact, do not eat or drink while using, wash thoroughly after handling
Storage: Store in cool, dry, well-ventilated place away from heat or sunlight, keep containers tightly closed, separate from incompatible substances like strong oxidizers or acids
Incompatible Materials: Strong acids, bases, oxidizing agents
Special Handling Instructions: Use only with adequate ventilation, keep away from children and untrained personnel
Exposure Limits: No specific occupational exposure limits established for this mixture, maintain general workplace control
Engineering Controls: Local exhaust ventilation recommended in areas of high concentration
Personal Protective Equipment: Chemical-resistant gloves (nitrile or neoprene), goggles or face shield, protective clothing, respiratory protection if vapor risk present
Hygiene Measures: Wash hands before breaks and after handling, do not reuse contaminated PPE, change clothing if coated with product
Appearance: Clear or slightly turbid liquid
Odor: Mild, slightly ammoniacal
pH: 6–8
Boiling Point: Above 100°C
Melting Point: Not available
Flash Point: Not flammable
Solubility: Fully miscible with water
Density: Approximately 1.25–1.30 g/cm³
Vapor Pressure: Not significant at normal temperatures
Autoignition Temperature: Not determined
Viscosity: Comparable to water
Partition Coefficient: Not available
Chemical Stability: Stable under recommended conditions
Thermal Decomposition: Degrades on strong heating, possible emissions of ammonia and oxides
Incompatible Materials: Avoid contact with oxidizing agents, strong acids, strong bases
Hazardous Decomposition Products: Ammonia, nitrogen oxides, phosphorus oxides
Reactivity: No hazardous reactions known under normal processing and storage
Acute Toxicity: Estimated oral LD50 > 2000 mg/kg for main components, not expected to be highly toxic
Skin Irritation: Prolonged or repeated contact can lead to mild irritation or sensitization
Eye Damage: Causes redness and pain on direct contact, usually reversible
Respiratory Effects: Inhalation of vapors or mist may cause throat irritation or coughing
Chronic Effects: No confirmed evidence of long-term health impacts from normal handling
Carcinogenicity: Not listed as carcinogen by NTP, IARC, or OSHA
Further Information: Persons with allergies or history of respiratory issues may react more strongly
Ecotoxicity: Toxic to fish and aquatic organisms based on phosphate and nitrogen content
Persistence and Degradability: Partially biodegradable, possible slow breakdown in water
Bioaccumulative Potential: Not expected to bioaccumulate significantly
Mobility in Soil: Product is water soluble and can migrate in moist environments
Other Adverse Effects: Excess in environment may contribute to eutrophication of water bodies, requiring controlled use and disposal
Product Disposal: Dispose of residue and waste in compliance with local environmental regulations
Container Disposal: Rinse container thoroughly before recycling or disposal, never reuse container for food or drink storage
Special Instructions: Avoid release to sewage, soil, or natural watercourses, use a licensed disposal contractor if possible
Waste Classification: Not considered hazardous waste under most local regulations but treat as industrial chemical residue
UN Number: Not regulated for land, sea, or air transport
Proper Shipping Name: Not subject to transport regulations
Hazard Class: Not applicable
Packing Group: Not applicable
Marine Pollutant: Product contains hazardous ingredients for environment; avoid bulk spill during transport
Special Precautions: Protect from extreme temperatures and puncture during transit, keep container upright and secure
Safety: Product contains substances listed under chemical safety regulations, including TSCA and REACH
Labeling: Includes hazard symbols and precautionary measures as required by GHS, OSHA, and CLP
Restrictions: Use restricted to trained personnel, not for retail use
Other Regulations: All additives meet current textile industry chemical stewardship standards; complies with flame retardant requirements under major industry codes
Notification: Local authorities may require notification before disposal of larger amounts, check applicable regional rules
